Mike Hoder’s signature grips are made in the USA by ODI from a Super Soft compound for the feel Mike wanted. At 31.5mm they are a little Bigger Than Most to help cushion some of Hoder’s infamous landings.
Diameter: 31.5mm Length: 160mm Compound: Super Soft Bar Ends: Nylon Plug Style w/Sharpie Shield logo
The Stranger Mass V2 Crank features an updated 2 PC version of the original mass crank with a custom molded logo cap. Primo BB included.
Primo BB included.
FIT CROSSFIT GRIPS – DARK RED
Flangeless, ribbed design with soft compound rubber. Great feeling grip for any type of riding. Extra soft and tacky rubber Medium diameter Matching Bar Plugs included
Length: 163mm Diameter: 31mm Durometer: Soft
Fit Begin “Scumbag” Bar 9.42″ Black
If you’re jonesing for a 4-piece bar that’s just a little “higher”, Begin’s signature 9.420″ rise bar could be just the joint you’re after.
Straight Gauge 2mm wall 4130 CrMo main tube Straight Gauge 19mm OD X 1.2mm wall crossbar 4Q Baked Post-Weld Heat Treat
SPECS > Rise 9.420″ or 9.00″ Width 29″ Back Sweep 11.5° Up Sweep 3° Weight 2.6 lbs (1.16kg)
FIT INDENT CRANKS – 170MM
FIT INDENT 19 CRANKS 19MM X 48 SPLINE
3PC RHD/LHD COMPATIBLE – ALSO WORKS WITH 19MM SPLINE DRIVE SPROCKETS
NO PINCH BOLT DESIGN
19mm MID BB INCLUDED
S&M SPEEDBALL TYRE 2.4
Available in a wire bead only in a high pressure casing with extra pinch flat protection for street riders that run lower pressure. The Speedball features a smooth unbroken center strip for less rolling resistance, and multi edged S/M shoulder tread design that looks cool and holds the ground. The 2.1 is light and fast and works well in the front or rear. Its big enough for todays street riding but small enough to stay out of the way on grinds, spines, or frames and forks with minimal clearance. The 2.4 works equally well on the front and rear for riders that prefer big tires.
20 x 2.40
Inflated Width: 2.5″ (63.6mm) Inflated Diameter: 21 (533mm) Max Pressure: 110 psi Weight: Black – 1.65 lb (26 oz)
FIT SAVAGE V2 GRIPS – BLUE
Slightly thicker ribs to cushion big drops and last longer. Thick midsized flange can easily cut off following groove.
V.2 has been lengthened to 163mm Extra soft and tacky rubber Mid flange design with groove to remove Matching Bar Plugs included